While concrete may be one of the strongest building materials available, that doesn't make it completely impervious to wear and water intrusion. Trust Garland's coatings approved for facades and walls to give you additional protection while beautifying the substrate.
Tuff-Coat is a heavy-bodied, ready-to-use, emulsified acrylic architectural wall coating. It damp-proofs and beautifies all exterior and interior masonry surfaces, such as concrete, stucco, brick, and external insulation and finishing systems (EFIS).
Tuff-Coat will not peel, chip, blister, or crack when applied on properly prepared surfaces. It hides stains and discolorations, is low fading, and has a washable coating surface. It bridges small, non-moving hairline cracks and masonry imperfections.
Application Method(s): Brush, Spray, Roller
Seal-A-Pore is a solvent-based, silane, and siloxane solution designed to damp-proof above-grade masonry surfaces. Seal-A-Pore is a transparent, colorless, thin liquid. It bars water from exterior masonry (above grade) surfaces without changing the texture of the surface on which it is applied.
Application Method(s): Brush, Spray
Seal-A-Pore HP is a high-performance, solvent-based silane sealer that forms an invisible water-repellent surface, allowing the substrate to maintain its original appearance. This transparent, colorless, thin liquid sealer penetrates deeply into tiny pores and protects mortar joints to minimize damage caused by expansion and contraction due to freeze/thaw cycles.
Application Method(s): Spray, Brush
